| Device Name | Specifications | Device Description | Device Image | Additional Notes | |
|---|---|---|---|---|---|
Software Products |
|||||
UMD&Tally Standard Edition |
NDT-T-S |
Full Chinese interface, dynamic source name following, special source name marking, 64 Tally display schemes, one-click switching between primary and backup source names and Tally information. |
|||
UMD&Tally Enterprise Edition |
NDT-T-E |
In addition to Standard Edition features, supports automatic hot failover between primary and backup systems (dual-server hot standby for higher reliability). |
|||
General Software Modules (Note: software modules can be used in combination) |
|||||
System Linkage Module |
NDT-S-C-1 |
JOYSTICK module: captures camera JOYSTICK trigger signals to enable linkage between the JOYSTICK, waveform monitors, and audio/video matrices (requires GPIO acquisition driver). | This module provides three different functions, configured according to actual project requirements. | ||
| Primary/backup signal linkage module: keeps the matrix EMG signal and switcher PGM signal in sync to prevent signal mis-switching during emergency failover. | |||||
| System snapshot module: saves controlled devices and parameters as a system snapshot, enabling one-click rapid switching between multiple modes to simplify operation (requires GPIO acquisition driver). | |||||
Matrix Switching Module |
NDT-S-C-2 |
Android tablet APP for viewing audio/video matrix status and signal scheduling. | Compatible with mainstream Android tablets. | ||
Source Name Pass-through Module |
NDT-S-C-3 |
Enables source name information sharing between Tally systems; required module for building a Tally system cluster. | |||
|
NDT-S-C-4 |
Outputs source name information to switcher control panel keycaps (switcher must support this feature, e.g. SONY MVS8000). | |||
Hardware Platform |
|||||
UMD&Tally Server (Recommended) |
ACP-1010MB |
Windows Embedded XP industrial PC, high performance, power-failure data protection. (1RU rack-mount, optional PCI multi-serial port card). |
|||
UMD&Tally Server (Alternative) |
ACP-2010MB |
Windows Embedded XP industrial PC, high performance, power-failure data protection. (2RU rack-mount, optional redundant power supply, optional PCI multi-serial port card). |
|||
Optional Hardware Accessories |
|||||
GPIO Acquisition Driver |
EIO-IO32 |
1RU, 64-channel GPIO (32 GPI, 32 GPO). | |||
KL-S |
1RU, 24-channel GPIO (16 GPI, 8 GPO). | ||||
GPO Driver |
EIO-032 |
1RU, 32-channel GPO. | |||
Multi-Serial Port Card |
CP-118U |
PCI card, 8x COM ports (RS-232/422/485). | |||
Serial Device Network Server |
NP5650-8 |
1RU, 8x COM ports (RS-232/422/485). | |||
Tally Light (Langwei) |
AC-TL30DE8 |
1RU, English dual-color 8-character Tally light module, requires mounting panel for installation. | |||
AC-TCP20D08 |
2RU, Tally light controller. | ||||
Tally Light Controller (Langwei) |
TLPS |
The Tally light centralized power supply module provides power to Tally lights through the "36-channel Tally light direct-drive module" port. The "36-channel Tally light direct-drive module" must be selected as a required accessory. | These two modules are additions designed to ensure long-distance, stable Tally light display. | ||
N/A |
36-channel Tally light direct-drive module: provides 36 RJ45 bus ports for 2RU and larger Tally controller chassis, used to connect and drive Tally light modules. | ||||
Tally Light (Qingdao) |
TLD-308UD |
1RU, English dynamic dual-color 8-character source indicator. | |||
Tally Light Controller (Qingdao) |
TLD-A |
2RU, requires TLD-8 to drive Tally light display. | |||
Tally Light Driver (Qingdao) |
TLD-8 |
2RU, supports up to 20 Tally lights per unit. | |||